Canon EOS 600D - Page 253

253
3 Custom Function SettingsN
2: 1/200 sec. (fixed)
The flash-sync speed is fixed to 1/200 sec. This more effectively
prevents subject blur and camera shake than with setting 1. However,
the background may come out darker than with setting 1.
C.Fn II: Image
C.Fn-4 Long exposure noise reduction
0: Off
1: Auto
For 1 sec. or longer exposures, noise reduction is performed
automatically if noise typical of long exposures is detected. This [Auto]
setting is effective in most cases.
2: On
Noise reduction is performed for all exposures of 1 sec. or longer. The
[On] setting may be effective for noise that cannot be detected or
reduced with the [Auto] setting.
When 1 or 2 is set, high-speed sync cannot be used with an external
Speedlite.
With settings 1 and 2, after the picture is taken, the noise reduction
process may take the same amount of time as the exposure. You cannot
take another picture until the noise reduction process is completed.
At ISO 1600 and higher, noise might be more pronounced with setting 2
than with setting 0 or 1.
With setting 1 or 2, if a long exposure is shot with the Live View image
displayed, “BUSY” will be displayed during the noise reduction process.
The Live View display will not appear until the noise reduction is
completed. (You cannot take another picture.)
www.devicemanuals.eu
www.devicemanuals.eu
C.Fn-4 Long exposure noise reduction
www.devicemanuals.eu
C.Fn-4 Long exposure noise reduction
www.devicemanuals.eu
For 1 sec. or longer exposures, noise reduction is performed
www.devicemanuals.eu
For 1 sec. or longer exposures, noise reduction is performed
automatically if noise typical of long exposures is detected. This [
www.devicemanuals.eu
automatically if noise typical of long exposures is detected. This [
setting is effective in most cases.
www.devicemanuals.eu
setting is effective in most cases.
Noise reduction is performed for all exposures of 1 sec. or longer. The
www.devicemanuals.eu
Noise reduction is performed for all exposures of 1 sec. or longer. The
] setting may be effective for noise that cannot be detected or
www.devicemanuals.eu
] setting may be effective for noise that cannot be detected or
Auto
www.devicemanuals.eu
Auto
] setting.
www.devicemanuals.eu
] setting.
www.devicemanuals.eu
With settings 1 and 2, after the picture is taken, the noise reduction
www.devicemanuals.eu
With settings 1 and 2, after the picture is taken, the noise reduction
process may take the same amount of
www.devicemanuals.eu
process may take the same amount of
take another picture until the noise reduction process is completed.
www.devicemanuals.eu
take another picture until the noise reduction process is completed.
At ISO 1600 and higher, noise might be more pronounced with setting 2
www.devicemanuals.eu
At ISO 1600 and higher, noise might be more pronounced with setting 2