Canon EOS 600D - Other Settings

198
When [Flash mode] is set to [E-TTL II], flash exposure compensation
can be set. The flash exposure compensation settings (see below)
which can be set will differ depending on the [Wireless func.] and
[Firing group] settings.
[Flash exp. comp]
The flash exposure compensation is
applied to the built-in flash and all
external Speedlites.
[2 exp. comp.]
The flash exposure compensation is
applied to the built-in flash.
[1 exp. comp.]
The flash exposure compensation is
applied to all external Speedlites.
[A,B exp. comp.]
The flash exposure compensation is
applied to both groups A and B.
If [Flash mode] is set to [E-TTL II], you can press the <A> button to
perform FE lock.
Other Settings
Flash Exposure Compensation
FE Lock
www.devicemanuals.eu
external Speedlites.
www.devicemanuals.eu
external Speedlites.
exp. comp.]
www.devicemanuals.eu
exp. comp.]
The flash exposure compensation is
www.devicemanuals.eu
The flash exposure compensation is
applied to the built-in flash.
www.devicemanuals.eu
applied to the built-in flash.
exp. comp.]
www.devicemanuals.eu
exp. comp.]
The flash exposure compensation is
www.devicemanuals.eu
The flash exposure compensation is
applied to all external Speedlites.
www.devicemanuals.eu
applied to all external Speedlites.
[A,B exp. comp.]
www.devicemanuals.eu
[A,B exp. comp.]
www.devicemanuals.eu
The flash exposure compensation is
www.devicemanuals.eu
The flash exposure compensation is
] is set to [
www.devicemanuals.eu
] is set to [