C Creative Auto Shooting
58
(3) Drive mode/Flash firing
When you press <0>, the drive mode
or flash firing setting screen will appear.
Set as desired, then press <0> to
finalize the setting and return to the
Quick Control screen.
Drive mode: Press the <U> key or turn the <6> dial to set it as
desired.
<u> Single shooting : Shoot one image at a time.
<i> Continuous shooting:
While you hold down the shutter button
completely, shots will be taken continuously.
You can shoot up to about 3.7 shots per sec.
<Q> Self-timer:10sec/Remote control :
The picture is taken 10 seconds after you
press the shutter button. A remote control
can also be used.
<q> Self-timer:Continuous :
Press the <V > key to set the number of
multiple shots (2 to 10) to be taken with the
self-timer. 10 seconds after you press the
shutter button, the set number of multiple
shots will be taken.
Flash firing: Press the <U> key or turn the <6> dial to set it as
desired.
<a> Auto flash: The flash fires automatically when necessary.
<I> Flash on : The flash fires at all times.
<b> Flash off : The flash is disabled.
When using <j> or <q>, see the notes on page 89.
When using <b>, see “Disabling Flash” on page 55.
To Next Page
Loading...
