Canon IMAGECLASS LBP654CDW - Page 314

<Direct Connection Settings>
Set whether to connect directly. By enabling this function, connecting directly with the machine is possible even in an
environment without an access point or wireless LAN router.
Connecting Directly (Access Point Mode)(P. 202)
<Use Direct Connection>
<Off>
<On>
<Direct Connection Termination>/<Time Until Direct Connection Termination>
Specify the time to automatically disconnect after Direct Connection is established.
Touch panel model
<Automatically Terminate Session>
<Off>
<On>
<Time Until Session Terminates>
1
to 60 (min.)
Black and white LCD model
0 (Do not terminate session automatically)
1 to 60 (min.)
Touch panel model
<Menu> <Preferences> <Network> <Direct Connection Settings> <Direct Connection
Termination> Select <On> in <Automatically Terminate Session> and enter the time <Apply>
<Apply>
Black and white LCD model
<Menu> <Preferences> <Network> <Direct Connection Settings> <Time Until Direct
Connection Termination> Enter the time
<Access Point Mode Settings>
Congure the SSID/network key arbitrarily. If you want to connect multiple mobile devices to the machine at the
same time, you need to congure both SSID and network key arbitrarily.
<Use Custom SSID>
<Off>
<On>
<SSID>
<Use Custom Network Key>
Setting Menu List
308