Canon IMAGECLASS LBP654CDW - Page 315

<Off>
<On>
<Network Key>
Touch panel model
<Menu> <Preferences> <Network> <Direct Connection Settings> <Access Point Mode
Settings> Select <On> for each item and select <SSID>/<Network Key> Enter the SSID/network
key <Apply> <Apply> <Apply>
Black and white LCD model
<Menu> <Preferences> <Network> <Direct Connection Settings> <Access Point Mode
Settings> <Use Custom SSID>/<Use Custom Network Key> <On> Enter the SSID/network
key <Apply>
<TCP/IP Settings>
Specify settings for using the machine in a TCP/IP network, such as IP address settings.
<IPv4 Settings>/<IPv6 Settings>/<DNS Settings> (Touch panel model)
<IPv4 Settings>
Specify settings for using the machine in an IPv4 network.
<IP Address Settings>
Congure the IP address, which is used for identifying devices, such as computers and printers, on a
TCP/IP network.
Setting IPv4 Address(P. 41)
<Auto Acquire>
<Auto Acquire>
<Off>
<On>
<Select Protocol>
<Off>
<DHCP>
<Auto IP>
<Off>
<On>
<Manually Acquire>
*2
<IP Address>: 0.0.0.0
<Subnet Mask>: 0.0.0.0
<Gateway Address>: 0.0.0.0
<Check Settings>
<DHCP Option Settings>
Setting Menu List
309