Canon IMAGECLASS LBP654CDW - Page 348

<Prevent Fogging>
If white areas are lightly colored, setting this item to <On> may solve the problem.
<Off>
<On>
<Menu> <Adjustment/Maintenance> <Adjust Image Quality> <Special
Processing>
<Prevent Fogging> <On> <Yes> ( )
● If you set to <On>, print density may be lighter.
<Correct Color Mismatch>
*
If color mismatch occurs, setting to <On> may solve the problem.
<Off>
<On>
<Menu> <Adjustment/Maintenance> <Adjust Image Quality> <Special
Processing> <Correct Color Mismatch> <On> <Yes> ( )
● If you set to <On>, the printing speed may be slower.
<Reduce Drum Streak>
If streaks appear on printouts, setting to <On> may solve the problem.
<Off>
<On>
<Menu> <Adjustment/Maintenance> <Adjust Image Quality> <Special
Processing> <Reduce Drum Streak> <On>
<Reduce Toner Flaking>
*
Toner may peel off the printed page depending on the paper type or the environmental conditions. In this case,
setting this item may solve the problem. The improvement effect is stronger with <Mode 2> than <Mode 1>.
First try with <Mode 1>.
Setting Menu List
342