Canon IMAGECLASS LBP654CDW - Page 371

<Check Paper Size in Tray>
Specify whether to cancel the printing when the paper size in the loaded paper is different from the one in the
printer driver.
<Off>
<On>
<Menu> <Function Settings> <Printer> <Printer Settings> <Check Paper Size in
Tray> Select <Off> or <On>
<Recovery Printing>
If printing is interrupted due to an error such as a paper jam, printing ordinarily restarts from the page on
which the error occurred after the error has been resolved. When <Off> is selected, the page on which an error
occurred is skipped, and printing restarts from the next page.
<Off>
<On>
<Menu> <Function Settings> <Printer> <Printer Settings> <Recovery Printing> Select
<Off> or <On>
When <Off> is selected
● The page may not be printed depending on the timing at which an error occurred.
● If an error occurs during 2-sided printing, both of the corresponding pages may not be printed.
<UFR II>
You can change the settings that become effective when printing from the UFR II printer driver.
<Halftones>
You can select the printing method used to reproduce halftones (the intermediate range between the lighter
and darker areas of an image) for optimal image quality.
<Error Diffusion>
Produces ner printing results than using <Resolution/Gradation>. This option is suitable for printing
sharp outlines of the text or ne-line data.
<Off>
<On>
Setting Menu List
365