Canon LBP7010C - The Printer Takes a Long Time to Start the Print Job

019A-057
<Cause 1> The printer stops until temperature inside the printer is lowered so that the print
quality is maintained (especially after paper with a narrower width is printed).
Solution
Please wait a moment.
Printing resumes after temperature inside the printer is lowered.
<Cause 2> This problem may occur in some applications depending on the processing type of
the print data.
Solution
Performing the following procedure in the printer driver may be able to solve the problem.
1. Display the [Finishing] sheet.
2. Click [Advanced Settings].
3. Change the [EMF Spooling] setting.
When [EMF Spooling] is set to [On], the Printer Status Window may not be displayed automatically.
In this case, display it manually.
(For details on methods for displaying the Printer Status Window, see "Printer Status Window.")
The Printer Takes a Long Time to Start the Print Job
㻞㻡㻤㻌㻛㻌㻟㻠㻟