Canon LBP7010C - Paper Creases

019A-061
Perform one of the following solutions according to the cause.
<Cause 1> The paper is not loaded properly.
Solution
Load the paper properly.
"Loading Paper"
<Cause 2> Damp paper is used.
Solution
Replace the paper with new paper in an unopened package.
"Precautions for Paper"
<Cause 3> Appropriate paper is not being used.
Solution
Replace the paper with that which can be used with this printer.
"Usable Paper"
<Cause 4> There is a foreign object inside the printer.
Solution Remove the foreign object inside the printer.
<Cause 5> Depending on the paper type or the operating environment (especially in a high-
humidity environment), the paper may be creased.
Solution 1
Perform the following procedure in the printer driver.
1. Display the [Paper Source] sheet.
2. Change the [Paper Type] setting as follows.
<Current Setting> <Changed Setting>
[Plain Paper] ĺ [Plain Paper L]
[Plain Paper H] ĺ [Plain Paper]
[Heavy Paper 1] ĺ [Plain Paper H]
[Heavy Paper 2] ĺ [Heavy Paper 1]
[Envelope H] ĺ [Envelope]
[Coated Paper 2] ĺ [Coated Paper 1]
[Coated Paper 3] ĺ [Coated Paper 2]
Paper Creases
㻞㻥㻢㻌㻛㻌㻟㻠㻟