019A-068
Perform one of the following solutions according to the cause.
<Cause 1> Appropriate paper is not being used.
Solution
Replace the paper with that which can be used with this printer.
"Usable Paper"
<Cause 2> Depending on the paper type or the operating environment (especially in a low-
humidity environment), smudge marks of spattering toner may appear.
Solution
Perform the following procedure in the printer driver.
1. Display the [Finishing] sheet.
2. Click [Advanced Settings].
3. Set [Special Print Mode] to [Special Settings A5].
If the problem is not solved, specify [Special Settings D7].
Normally, use the printer with [Special Print Mode] set to [Off]. Change the settings only if the
described problems occur.
When using paper that has been stored in an environment high in temperature and humidity, do
not specify [Special Settings A5]. Print quality may deteriorate.
Smudge Marks of Spattering Toner Appear around the Text or Patterns
㻟㻜㻡㻌㻛㻌㻟㻠㻟
To Next Page
Loading...
