Canon LBP7010C - Printed Transparencies or Coated Paper Are Stuck each Other or Printed Images Are Peeled off

019A-08C
Perform the following procedure in the printer driver.
1. Display the [Finishing] sheet.
2. Click [Advanced Settings].
3. Set [Special Print Mode] to [Special Settings H2].
Normally, use the printer with [Special Print Mode] set to [Off]. Change the settings only if the described problems
occur.
If you specify [Special Settings H2], printing speed drops.
Printed Transparencies or Coated Paper Are Stuck Each Other or
Printed Images Are Peeled Off
㻟㻟㻝㻌㻛㻌㻟㻠㻟