Canon LBP7010C - Shaded Patterns Are Not Printed in the Correct Color (Specified Color)

019A-086
Perform the following procedure.
<Cause> The shaded pattern of the print data and the dither pattern of the printer are
interfering with one another.
Solution 1
Print again without specifying a shaded pattern in the application.
See the instruction manual supplied with the application.
Solution 2
Perform the following procedure in the printer driver.
1. Display the [Quality] sheet.
2. Click [Advanced Settings].
3. Set [Color Halftones] or [B & W Halftones] to [Gradation] or [Color Tone].
Shaded Patterns Are Not Printed in the Correct Color (Specified Color)
㻟㻝㻤㻌㻛㻌㻟㻠㻟