Cannot Print
<Cause> Printing cannot be performed due to security restrictions.
Solution Contact your administrator.
Could Not Print
<Cause> Data transfer to the printer timed out, or a transfer error has occurred.
Solution 1
Clicking [
] (Resolve Error) continues printing.
However, the error message may appear again.
Solution 2
Cancel the print job, and then print again.
"Canceling a Job"
Check the Printed Output
<Cause> You may not be able to obtain appropriate printout results.
Solution 1
Clicking [
] (Resolve Error) continues printing.
However, the error message may appear again.
Solution 2
Cancel the print job, and then print again.
"Canceling a Job"
Cover Open
<Cause> The top cover or rear cover is open.
Solution Close the top cover and rear cover.
Paper Jam inside Printer
<Cause> A paper jam is occurring.
Solution
Do not pull out the jammed paper forcefully but remove it following the procedure described in the e-
Manual.
"Paper Jams"
Calibration Error
<Cause> Calibration could not be finished properly.
Solution 1
Cancel printing, make sure that the toner remains in the toner cartridges, and then perform calibration
again.
"Canceling a Job"
"Checking the Consumables Status"
"Adjusting Color (Calibration)"
When the toner cartridges have reached end of their life, replace those cartridges, and then
perform calibration again.
"Toner Cartridge Replacement"
㻞㻤㻡㻌㻛㻌㻟㻠㻟
To Next Page
Loading...
