Canon MK5000 - Page 159

155
Contents
Preparation/
Setup
Print Using a
Computer
Appendix
IndexPrint/SaveInput/Edit
Names of
Components
Maintenance/
Printer Settings
Trouble-
shooting
[Alignment]
󱾀
If you set the set length to "Specify," you can change the alignment of text on the
compound page
. The default setting for alignment is set to "Centered."
󱾀
When the plate printing area is set to "Expansion," the "Left-justi ed" and "Right-
justi
ed" margins cannot be set. (They will be set to "0 mm.")
󱾀
For print image, refer to
"Specify the Cut Length and Alignment (P.55)"
.
[All line centering]
󱾀
Centers multiple lines of text on the page. The default setting is "O ."
󱾀
For print image, refer to
"Align Multiple Lines of Text to the Center (P.61)"
.
[Between pages]
󱾀
Specify the distance between pages in the range of 2.0 to 10.0 mm. The default
setting is 2.0 mm.
[F
ont]
󱾀
Specify the font to be used for compound page printing. The default setting is "Arial."
󱾀
The font installed in your environment can be selected.
NOT
E
• When the print media is a label or a plate, if the set length is "less than 8.0 mm" and the plate printing
area is "Normal," "Rule con guration" (Centered) is applied and the setting cannot be changed.
• If the alignment is set to "Even distribution," the even distribution setting will take priority even if the
character space is set.
• If you set the orientation to "Vert/Hor char," the settings will be as follows.
- The character space is set to "Narrow" and cannot be changed.
- The text will be printed centered even if the alignment is set to "Even distribution."
- Regardless of the "All line centering" setting, all lines will be centered and printed.
- The center line will not be printed regardless of the center line setting.
• You may not select "All line centering" in the following cases.
- When the set length is set to "Automatic."
- When the text alignment is set to anything other than "Centered."
- When the number of lines is set to "1 Line."
- When orientation is set to "Vert/Hor char" (and "All line centering" is set to "On").