213
Contents
Preparation/
Setup
Print Using a
Computer
Appendix
IndexPrint/SaveInput/Edit
Names of
Components
Maintenance/
Printer Settings
Trouble-
shooting
(Continued from previous
page)
The device does not print
clearly.
The printing is
misaligned.
The printing is missing or
blurred.
Are the print density and print
speed appropriate?
Adjust the print density to be
darker.
(P.90)
Slow down the
print speed.
(P.91)
You may be able to improve
the problem by changing the
print priority.
Try setting the print priority to
"First Print."
(P.199)
Are the transport rollers dirty? Clean the transport rollers. We
recommend cleaning the rollers
about once a month.
(P.185)
Is the print head dirty? Clean the print head. We
recommend cleaning the print
head about once a month.
(P.187)
Is the cleaner of the
attachment or (optional) tube
warmer dirty?
Clean the cleaner. We
recommend cleaning the
cleaner about once a month.
(P.188)
If the cleaner is worn out,
replace it with a new cleaner.
Is the inside of the printer dirty? Clean the inside of the printer.
(P.183)
Is the operating environment
appropriate?
For information concerning the
operating environment, refer to
"Speci cations (P.226)"
.
If you use a tube warmer
(optional), you can print at
external temperatures as low as
5°C (41°F).
If the problem is not solved by
using the tube warmer.
Set the temperature of the tube
warmer to "High."
(P.34)
The parts of the tube that do
not pass through the tube
warmer (such as the top
portion of the tube) will not be
warmed up. Check the printout
on a warmed area.
To Next Page
Loading...
