SECTION 3
3-6
CODE ACTIVATION
In operating mode depress repeatedly the arrow
button, until on main menu appears “CODE” on grey
background.
By means of the arrow buttons you can select
“closed-lock” symbol and confirm the selection with
“set” button.
CODE DEACTIVATION
In operating mode depress repeatedly the arrow
button, until on main menu appears “CODE” on grey
background and confirm with button “set”.
By means of the arrow buttons you can select now
the “open-lock” symbol and confirm the selection
with “set” button.
FURTHER SETTINGS
Similar to the above procedure, the code can also
be changed and deactivated in this sub-menu and a
time set after which the code is to become active.
The machine can thus be put back into operation
after a pause without the need to re-enter the new
code, if this is done within the preset time.
To Next Page
Loading...
