Case WX145 - Off-Set Boom - Greasing

SUPPLIES AND SERVICE CHART
4-21
OFF-SET BOOM - GREASING
Grease all articulation pins and cylinders pins.
Position Lubrication point Quantity
1 Extension/retraction cylinder joint (rod side)
Bucket cylinder joint (bottom side)
1
1
2 Boom cylinder joint (bottom side) 2x1
3 Extension/retraction cylinder joint 2x1
4 Clamshell (optional)
-Joints
- clamshell bucket rotation gear teeth
- Clamshell bucket / dipper joint
10
2
2x1
5 Grease nipples block
- Extension/retraction cylinder joint (rod side)
- Boom cylinder joint (rod side)
- Adjusting cylinder joint (rod side)
- Adjusting cylinder joint (rod side)
- Boom cylinder joint (rod side)
- Lifting boom / placing boom joint
- Monoboom / dipper joint
2x1
2x1
2x1
2x1
2x1
2x1
2x1
6 Joints on the linkage
Linkage / placing boom joint
Bucket cylinder joint (rod side)
Bucket / placing boom joint
4
2
1
2x1
7 Upper structure
- Upper structure locking pin 1
18