SECTION 4
4-6
WORKING HOURS / INTERVALS
A condition for the Manufacturer to take over the
costs of the warranty service, is the regular perform-
ance of all inspection, maintenance and repair oper-
ations prescribed, as instructed by this Operator’s
Manual and the use of genuine spares.
During the warranty period, all inspection works,
maintenance and repair, with exception for the daily
and weekly maintenance, have to be performed by
the After-sales service or by an authorized work-
shop.
To ensure the correct operation and life of the
machine and of its components, a time schedule
has been established, to perform all maintenance
service that has to be done.
The maintenance intervals indicated in this manual
are valid for normal use conditions. If the use condi-
tions are more severe, the intervals are shortened
accordingly.
The working hours (1) necessary to determine the
maintenance intervals, are shown on the multi-func-
tion display inside of the cab.
At machine start, the multi-function display shows
besides an indication of the expiry and next interval
type.
500 HOURS
4
To Next Page
Loading...
