CONTROLS AND INSTRUMENTS
2-39
STEERING COLUMN
Do not adjust the steering column during travel.
Before adjusting the steering column:
- stop the machine;
- position the button of travel direction to idle;
- activate the parking brake.
The angle of the steering column can be adjusted to
suit the height and posture of the operator. For this
operation proceed as follows:
- press lever with toe cap down and keep in position
lever (2) to unlock the steering column;
- tilt steering column (1) into required position;
- release lever (2) to lock steering column (1);
- check that the steering column is locked.
43
To Next Page
Loading...
