OPERATING THE MACHINE
3-23
TRAVEL WITH LOAD APPLIED TO
CRANING HOOK
Turn the load toward travel direction. The flywheel
must be placed in this case over the steering axle.
Approach the load as near as possible to the earth
and to the machine.
Lock the upper structure with the stud (1).
Apply the holding brake of the upper structure with
push-button (2). The symbol left lamp lights up. At
the same time the lamp lights up on display.
Release the blocking the floating axle by depressing
push-button (3) (the right lamp lights off).
Proceed with caution and slowly.
32
To Next Page
Loading...
