SECTION 7
7-38
CAB PROTECTIONS
When you work in areas where there is the danger
of rocks or debris falling the use of following cab
protections is unavoidable.
- (1) FOPS (Falling Object Protective Structure),
tubular structure to install over the cab roof.
- (2) FGPS (Front Guard Protective System), tubu-
lar structure to install on the front side of the cab.
NOTE: usually the FOPS protection (1) can be sup-
plied either alone or coupled with the FGPS protec-
tion (2).
BLADE PROTECTION
The blade can be equipped with a protection (1),
installed frontally between the blade and the under-
carriage, with the aim to protect the blade cylinders
and relevant hydraulic pipes.
TRANSPORT BRACKET FOR CLAMSHELL
A transport bracket (1) can be supplied for the clam-
shell transport, to fasten on the front side of the
undercarriage.
Secures the clamshell during travel or excavator
transport.
64
65
66
To Next Page
Loading...
