SUPPLIES AND SERVICE CHART
4-23
Do not overinflate the tyres, because if bumped they
can break easily and under extreme conditions the
rim can get deformed and the tyre can burst.
Park the machine on level and firm ground with suf-
ficient strength.
Place the working equipment on the ground.
Engage the parking brake.
Shut off the engine.
Attach the self-locking nozzle of the inflating equip-
ment to the tyre filling valve (1).
The device is equipped with a pressure gauge (2),
that when connected, allows to check the pressure
value.
If the pressure results to be lower than expected,
proceed to the inflation.
SUGGESTED PRESSURES
The pressures are valid for the types of tyres and
equipment listed and to following conditions:
- working attachment installed;
- bucket empty;
- tyres at environment temperature (about 20 °C
(68 °F));
- fuel tank full.
S CAUTION S
The tyres inflating pressure varies according to the
load applied to axles.
Tyres Manufacturer Type Pressure (bar) (psi)
Twin
Mitas 10.00-20 PR16 NB38 7.50 (109)
Mitas 11.00-20 PR16 NB38 7.25 (105)
Bridgestone 10.00-20 PR16 FGF 7.50 (109)
Bridgestone 11.00-20 PR16 FGF 7.00 (102)
Bridgestone 10.00-20 PR14 FG 6.5 (94)
Bandenmarkt Excavator PR18 315/80 R 22.5 8.0 (116)
Bandenmarkt Grader PR18 315/80 R 22.5 8.5 (123)
Single
Michelin 18 R 19.5 XF 8.00 (116)
Mitas 600/40 - 22.5 I-331 6.00 (87)
20
To Next Page
Loading...
