ATTACHMENTS
7-9
The hydraulic shears must be used with front attach-
ment oriented towards the longitudinal position of
the excavator. The use of other orientations could
impair machine stability and originate risks of over-
turning.
When you work with the hydraulic shears oriented
upwards and the boom extended pay attention to
the fall of debris.
When you work with the hydraulic shears on a build-
ing floor, always check that the floor is strong
enough to support the shears weight summed to the
machine weight.
The excavator must always work on levelled and
stable soil. Never work on material debris or inclined
surfaces.
Never use the shears to transfer or move demol-
ished material.
Always disassemble the shears from the excavator
before beginning the transport.
Never transport the excavator with the bucket cylin-
der fully extended; the front attachment could get
damaged because of the transport vibrations.
14
To Next Page
Loading...
