Using Internet Setup
116 Check Point UTM-1 Edge User Guide
Configuring a Direct ADSL Connection
1. In the Port drop-down list, select ADSL.
2. Do one of the following:
• To automatically fill in the supported ADSL settings for your ISP, do the
following:
1) Click Search by country and ISP.
The ADSL Configuration Assistant opens.
2) In the Country drop-down list, select your country.
3) In the ISP / Telco drop-down list, select your ISP or telephone
company.
The ADSL Configuration Assistant closes. The Connection Type drop-down
list and the ADSL Link Settings fields are filled in with the correct values for
your ISP.
• To manually fill in the supported ADSL settings for your ISP, in the
Connection Type drop-down list, select the Internet connection type you
intend to use.
The display changes according to the selected connection type.
For PPPoA, continue at Using a PPPoA Connection on page
117.
For EoA, continue at Using an EoA Connection on page
119.
For PPPoE, continue at Using a PPPoE Connection on page
121.
For information on configuring bridged connections, see Adding Internet
Connections to Bridges on page
237.
To Next Page
Loading...
