Using Internet Setup
Chapter 5: Configuring the Internet Connection 137
In this field… Do this…
Service Type your service name.
If your ISP has not provided you with a service name, leave this field
empty.
Server IP If you selected PPTP, type the IP address of the PPTP server as given
by your ISP.
If you selected Telstra (BPA), type the IP address of the Telstra
authentication server as given by Telstra.
Phone Number If you selected Dialup, type the phone number that the modem should
dial, as given by your ISP.
Connect on
demand
Select this option if you do not want the appliance to be constantly
connected to the Internet. The appliance will establish a connection only
under certain conditions.
This option is useful when configuring a backup connection. For
information, see Configuring a Backup Internet Connection on page
155.
When no higher
priority connection
is available
Select this option to specify that the appliance should only establish a
connection in the following cases:
• When no other connection exists, and the UTM-1 appliance is
not acting as a Backup appliance.
If another connection opens, the appliance will disconnect.
For information on configuring the appliance as a Backup or
Master, see Configuring High Availability on page
243.
• When there is interesting traffic (that is, traffic for which no
static route is defined).
To Next Page
Loading...
