Configuring Network Settings
Chapter 6: Managing Your Network 165
Enabling/Disabling the UTM-1 DHCP Server
You can enable and disable the UTM-1 DHCP Server for internal networks.
To enable/disable the UTM-1 DHCP server
1. Click Network in the main menu, and click the My Network tab.
The My Network page appears.
2. In the desired network's row, click Edit.
The Edit Network Settings page appears.
3. From the DHCP Server list, select Enabled or Disabled.
4. Click Apply.
A warning message appears.
5. Click OK.
A success message appears
6. If your computer is configured to obtain its IP address automatically (using
DHCP), and either the UTM-1 DHCP server or another DHCP server is
enabled, restart your computer.
If you enabled the DHCP server, your computer obtains an IP address in the DHCP
address range.
To Next Page
Loading...
