Configuring Network Settings
166 Check Point UTM-1 Edge User Guide
Configuring the DHCP Address Range
By default, the UTM-1 DHCP server automatically sets the DHCP address range. The
DHCP address range is the range of IP addresses that the DHCP server can assign to
network devices. IP addresses outside of the DHCP address range are reserved for
statically addressed computers.
If desired, you can set the UTM-1 DHCP range manually.
To configure the DHCP address range
1. Click Network in the main menu, and click the My Network tab.
The My Network page appears.
2. In the desired network's row, click Edit.
The Edit Network Settings page appears.
3. Do one of the following:
• To allow the DHCP server to set the IP address range, select the Automatic
DHCP range check box.
• To set the DHCP range manually:
1) Clear the Automatic DHCP range check box.
To Next Page
Loading...
