Configuring Network Settings
Chapter 6: Managing Your Network 173
In this field… Do this…
Automatically assign
default gateway
Clear this option if you do not want the DHCP server to pass the
current gateway IP address to DHCP clients as the default gateway's
IP address.
Normally, it is recommended to leave this option selected.
The Default Gateway field is enabled.
Default Gateway Type the IP address to pass to DHCP clients as the default gateway,
instead of the current gateway IP address.
Other Services
These fields are not available for the OfficeMode network.
Time Server 1, 2 To use Network Time Protocol (NTP) servers to synchronize the time
on the DHCP clients, type the IP address of the Primary and
Secondary NTP servers.
Call Manager 1, 2 To assign Voice over Internet Protocol (VoIP) call managers to the IP
phones, type the IP address of the Primary and Secondary VoIP
servers.
TFTP Server Trivial File Transfer Protocol (TFTP) enables booting diskless
computers over the network.
To assign a TFTP server to the DHCP clients, type the IP address of
the TFTP server.
TFTP Boot File Type the boot file to use for booting DHCP clients via TFTP.
X-Windows Display
Manager
To assign X-Windows terminals the appropriate X-Windows Display
Manager when booting via DHCP, type the XDM server's IP address.
Avaya IP Phone To enable Avaya IP phones to receive their configuration, type the
phone's configuration string.
To Next Page
Loading...
