Check Point UTM-1 Edge - Using Network Objects

Configuring Network Settings
174 Check Point UTM-1 Edge User Guide
In this field… Do this…
Nortel IP Phone To enable Nortel IP phones to receive their configuration, type the
phone's configuration string.
Thomson IP Phone To enable Thomson IP phones to receive their configuration, type the
phone's configuration string.
Configuring a DMZ Network
In addition to the LAN network, you can define a second internal network called a DMZ
(demilitarized zone) network.
For information on default security policy rules controlling traffic to and from the DMZ,
see Default Security Policy on page
327.
To configure a DMZ network
1. Connect the DMZ computer to the DMZ port.
If you have more than one computer in the DMZ network, connect a hub or switch to
the DMZ port, and connect the DMZ computers to the hub.
2. Click Network in the main menu, and click the Ports tab.