Configuring Network Settings
176 Check Point UTM-1 Edge User Guide
The Port Setup page appears.
4. In the Assign to network drop-down list, select DMZ.
5. Click Apply.
A warning message appears.
6. Click OK.
7. Click Network in the main menu, and click the My Network tab.
The My Network page appears.
8. In the DMZ network's row, click Edit.
The Edit Network Settings page appears.
9. In the Mode drop-down list, select Enabled.
The fields are enabled.
10. In the IP Address field, type the IP address of the DMZ network's default
gateway.
Note: The DMZ network must not overlap other networks.
To Next Page
Loading...
