Using NAT Rules
364 Check Point UTM-1 Edge User Guide
Field Description
Change the
destination to
Select the new destination to which the original destination should be
translated.
To specify an IP address, select Specified IP and type the desired IP
address in the field provided.
To specify an IP address range, select Specified Range and type the desired
IP address range in the fields provided.
To specify that the original destination should not be translated, select
Don't Change.
Change the
service to
Select the new service to which the original service should be translated.
To specify that the original service should not be translated, select Don't
Change.
Viewing and Deleting NAT Rules
This procedure explains how to view all NAT rules and how to delete custom NAT rules.
You cannot delete implicitly defined NAT rules directly.
To view and delete NAT rules
1. Click Security in the main menu, and click the NAT tab.
The Address Translation page appears with a list of all existing NAT rules.
Implicitly defined NAT rules are marked Automatic Rule in the right-most column.
2. To delete a custom NAT rule, do the following.
a. In the desired rule's row, click the Erase
icon.
A confirmation message appears.
To Next Page
Loading...
