Using NAT Rules
Chapter 12: Setting Your Security Policy 363
Field Description
And the
destination is
Select the original destination of the connections you want to translate.
To specify an IP address, select Specified IP and type the desired IP
address in the text box.
To specify an IP address range, select Specified Range and type the
desired IP address range in the fields provided.
To specify the UTM-1 IP address, select This Gateway.
To specify any destination except the UTM-1 Portal and network printers,
select ANY.
And the service is Select the original service used for the connections you want to translate.
Change the
source to
Select the new source to which the original source should be translated.
To specify an IP address, select Specified IP and type the desired IP
address in the field provided.
To specify an IP address range, select Specified Range and type the desired
IP address range in the fields provided.
To specify that the original source should not be translated, select Don't
Change.
To Next Page
Loading...
