Configuring HTTPS
594 Check Point UTM-1 Edge User Guide
Table 121: Access Options
Select this
option…
To allow access from…
Internal Networks The internal network only.
This disables remote access capability. This is the default.
Internal Networks +
VPN
The internal network and your VPN.
Internal Networks +
IP Range
A particular range of IP addresses.
Additional fields appear, in which you can enter the desired IP address
range.
ANY Any IP address.
Disabled Nowhere.
This disables both local and remote access capability.
This option is relevant to the SNMP protocol only.
To Next Page
Loading...
