Before You Install the UTM-1 Appliance
58 Check Point UTM-1 Edge User Guide
Note: Normally, it is not recommended to assign a static IP address to your PC but
rather to obtain an IP address automatically. If for some reason you need to assign
a static IP address, select Specify an IP address, type in an IP address in the range of
192.168.10.129-254, enter 255.255.255.0 in the Subnet Mask field, and click OK to
save the new settings.
(Note that 192.168.10 is the default value, and it may vary if you changed it in the
Network > My Network page.)
3. Click the Obtain DNS server address automatically radio button.
4. Click OK to save the new settings.
Your computer is now ready to access your UTM-1 appliance.
Windows 2000/XP
Checking the TCP/IP Installation
1. Click Start > Settings > Control Panel.
The Control Panel window appears.
To Next Page
Loading...
