6-11
Cisco 4700 Series Application Control Engine Appliance Administration Guide
OL-11157-01
Chapter 6 Viewing ACE Hardware and Software Configuration Information
Displaying Process Status Information and Memory Resource Limits
Table 6-8 describes the fields in the show processes memory command output.
Ta b l e 6-8 Field Descriptions for the show processes memory Command
Field Description
PID Process identifier
MemAlloc Total memory allocated by the process
StackBase/Ptr Process stack base and current stack pointer in hex
for
mat
Process Name of the process
Displaying Process Status Information and Memory
Resource Limits
To display detailed process status information and memory resource limits, use the
show terminal internal info Exec mode command.
The syntax of this command is:
show terminal internal info
For example, enter:
host1/Admin# show terminal internal info
Table 6-9 describes the fields in the show terminal internal info command output.
Ta b l e 6-9 Field Descriptions for the show terminal internal info
Command
Field Description
Process Information
Name Name of the executable that started the process.
To Next Page
Loading...
