7-51
Cisco 4700 Series Application Control Engine Appliance Administration Guide
OL-11157-01
Chapter 7 Configuring Redundant ACE Appliances
Displaying Redundancy Information
Displaying FT Statistics
To display peer information, use the show ft stats command in Exec mode. The
syntax of this command is:
show ft stats gr
oup_id
The g
roup_id argument displays additional load-balancing statistics (LB
statistics) for the specified group.
For example, enter:
host1/Admin# show ft stats 1
Rx Error Bytes Total number of error bytes that the local ACE received from
the peer.
Tx Keepalive
P
ackets
Total number of keepalive packets that the local ACE sent to
the peer.
Rx Keepalive
P
ackets
Total number of keepalive packets that the local ACE
received from the peer.
SRG
Co
mpatibility
Status of whether the software version of the local ACE and
the software version of the peer ACE are compatible.
Possible states are the INIT, COMPATIBLE, or
INCOMPATIBLE state.
License
Co
mpatibility
Status of whether the license of the local ACE and the
license of the peer ACE are compatible. Possible states are
the INIT, COMPATIBLE, or INCOMPATIBLE state.
FT Groups Number of FT groups.
Table 7-4 Field Descriptions for the show ft peer Command Output
(continued)
Field Description
To Next Page
Loading...
Need help?
General
