Chapter 2 Enabling Remote Access to the ACE
Viewing Session Information
2-24
Cisco 4700 Series Application Control Engine Appliance Administration Guide
OL-11157-01
Viewing Session Information
This section includes the following procedures:
• Showing Telnet Session Information
• Showing SSH Session Information
Showing Telnet Session Information
To display information related to the Telnet session, use the show telnet command
in Exec mode. Only the context administrator can view Telnet information
associated with a particular context.
The syntax of this command is:
show telnet [cont
ext_name]
The optional cont
ext_name argument specifies the name of the context for which
you want to view specific Telnet session information. The context_name argument
is case sensitive.
For example, enter:
host1/Admin# show telnet
To Next Page
Loading...
