2-25
Cisco 4700 Series Application Control Engine Appliance Administration Guide
OL-11157-01
Chapter 2 Enabling Remote Access to the ACE
Viewing Session Information
Table 2-2 describes the fields in the show telnet command output.
Ta b l e 2-2 Field Descriptions for the show telnet Command
Field Description
SessionID Unique session identifier for the Telnet session.
Remote Host IP address and port of the remote Telnet client.
Active Time Time since the Telnet connec
tion request was
received by the ACE.
To display the maximum number of enabled Telnet sessions, use the sho
w telnet
maxsessions command in Exec mode. Only context administrators can view
Telnet session information associated with a particular context.
The syntax of this command is:
show telnet maxsessions [co
ntext_name]
The optional cont
ext_name argument specifies the name of the context for which
you want to view the maximum number of Telnet sessions. The context_name
argument is case sensitive.
For example, enter:
host1/Admin# show telnet maxsessions
Maximum Sessions Allowed is 4
To Next Page
Loading...
