Chapter 4 Configuring Class Maps and Policy Maps
Example of a Traffic Policy Configuration
4-68
Cisco 4700 Series Application Control Engine Appliance Administration Guide
OL-11157-01
Example of a Traffic Policy Configuration
The following example illustrates a running configuration that includes multiple
class maps and policy maps that define a traffic policy for SLB. The class map and
policy map configuration appears in bold in the example.
In this configuration, when a server f
arm is chosen for a connection, the
connection is sent to a real server based on one of several load-balancing
predictors. The leastconns predictor method load balances connections to the
server that has the lowest number of open connections.
access-list ACL1 line 10 extended permit ip any any
probe tcp TCP
interval 5
faildetect 2
passdetect interval 10
open 3
parameter-map type http PERSIST-REBALANCE
persistence-rebalance
parameter-map type connection PRED-CONNS-UDP_CONN
set timeout inactivity 300
serverfarm host PRED-CONNS
predictor leastconns
rserver SERVER1
inservice
rserver SERVER2
inservice
rserver SERVER3
inservice
rserver SERVER4
inservice
rserver SERVER5
inservice
rserver SERVER6
inservice
rserver SERVER7
inservice
rserver SERVER8
inservice
To Next Page
Loading...
