Chapter 6 Viewing ACE Hardware and Software Configuration Information
Displaying System Processes
6-6
Cisco 4700 Series Application Control Engine Appliance Administration Guide
OL-11157-01
Table 6-3 describes the fields in the show environment command output.
Ta b l e 6-3 Field Descriptions for the show environment Command
Field Description
Inlet Inlet flow temperature of the ACE
Outlet Outlet flow temperature of the ACE
SIBYTE Temperature of the SiByte 1250 Processor
HYPERION Temperature of the Hyperion ASIC
CDE0 Temperature of CDE 0
CDE1 Temperature of CDE 1
IXP0 Temperature of the IXP2800 Network Processor
(IXP 0)
IXP1 Temperature of the IXP2800 Network Processor
(IXP 1)
SSA Temperature of the SSA ASIC
Displaying System Processes
To display general information about all of the processes running on the ACE, use the
show processes command. The show processes command displays summary CPU
information for the Intel Pentium processor.
The s
how processes command is available only to users with an Admin role across
all contexts. The displayed system processes information is at the CPU system level
(the total CPU usage) and is not on a per-context level.
The syntax of this command is:
show processes [cpu | lo
g [details | pid process_id] | memory]
The keywords, arguments, and options are:
• cpu—Displays CPU information for the Intel Pentium processor.
• log—Displays information about process logs.
• details—Displays process log information for all process identifiers.
To Next Page
Loading...
