2-1
Cisco 4700 Series Application Control Engine Appliance Administration Guide
OL-11157-01
CHAPTER
2
Enabling Remote Access to the ACE
This chapter describes how to configure remote access to the Cisco 4700 Series
Application Control Engine (ACE) appliance by establishing a remote connection
by using the Secure Shell (SSH) or Telnet protocols. It also describes how to
configure the ACE to provide direct access to a user context from SSH. This
chapter also covers how to configure the ACE to receive ICMP messages from a
host.
This chapter includes the following major sections:
• Remote Access Configuration Quick Start
• Configuring Remote Network Management Traffic Services
• Configuring Telnet Management Sessions
• Configuring SSH Management Sessions
• Terminating an Active User Session
• Enabling ICMP Messages to the ACE
• Directly Accessing a User Context Through SSH
• Example of a Remote Access Configuration
• Viewing Session Information
Note For information about how to make a direct connection using a dedicated terminal
attached to the Console port on the front of the ACE, configure terminal display
attributes, and configure terminal line settings for accessing the ACE by console
or virtual terminal connection, see Chapter 1, Setting Up the ACE.
To Next Page
Loading...
