Chapter 7 Configuring Redundant ACE Appliances
Displaying Redundancy Information
7-54
Cisco 4700 Series Application Control Engine Appliance Administration Guide
OL-11157-01
Displaying FT Tracking Information
To display tracking information, use the show ft track command in Exec mode.
The syntax of this command is:
show ft track {det
ail | status | summary}
The keywords and arguments are:
• detail—Displays detailed tracking information
• status—Displays the current operating status of the peer plus additional
information
• summary—Displays summary peer information
For example, enter:
host1/Admin# show ft track detail
Table 7-6 describes the fields in the show ft track command output.
Ta b l e 7-6 Field Descriptions for the show ft track Command Output
Field Description
FT Group FT group identifier.
Status Configured state of the FT group. Possible states a
re the
in-service or out-of-service state.