Chapter 6 Viewing ACE Hardware and Software Configuration Information
Displaying ICMP Statistics
6-16
Cisco 4700 Series Application Control Engine Appliance Administration Guide
OL-11157-01
Table 6-11 describes the fields in the show system uptime command output.
Ta b l e 6-11 Field Descriptions for the show system uptime Command
Field Description
System start time Date and time when the ACE was turned on
System uptime Length of time that the ACE hardware and software
ha
ve been running
Kernel uptime Length of time that the operating system (OS) has
been ru
nning
Displaying ICMP Statistics
To display Internet Control Message Protocol (ICMP) statistics, use the show icmp
statistics command. The syntax of this command is:
show icmp statistics
For example, enter:
host1/Admin # show icmp statistics
Use the clear icmp statistics command to clear the ICMP statistics.
Table 6-12 describes th
e fields in the show icmp statistics command output.
Ta b l e 6-12 Field Descriptions for the show icmp-statistics Command
Field Description
Total Messages Total number of ICMP messages transmitted or
re
ceived by the ACE
Errors Number of ICMP error messages transmitted or
re
ceived by the ACE
Echo Request Number of ICMP echo request messages transmitted
or re
ceived by the ACE
Echo Reply Number of ICMP echo reply messages transmitted or
re
ceived by the ACE
To Next Page
Loading...
