Cisco SPA942 - Cisco - IP Phone

Preface
Cisco SPA and Wireless IP Phone Administration Guide 11
Organization
This table describes the contents of each chapter in this document.
Chapter Title Description
Chapter 1 This chapter.
Chapter 2 Getting Started Describes the first steps to
administering your Cisco SPA IP or
Wireless-G phones, including
upgrading firmware and accessing
the web administration interface.
Chapter 3 Configuring Lines and
Extensions
Contains information for configuring
phone lines and extensions.
Chapter 4 Customizing Cisco SPA
and Wireless IP Phones
Gives information about customizing
phones, including configuring call
features and phone features.
Chapter 5 Configuring SIP, SPCP,
and NAT
Covers configuring the phone
protocol (SIP or SPCP) and NAT.
Chapter 6 Configuring Security,
Quality, and Network
Features
Describes configuring security,
quality, and network features such as
codecs, domains, and VLAN settings.
Chapter 7 Provisioning Basics Describes how to remotely provision
and upgrade the phones.
Chapter 8 Configuring Regional
Parameters and
Supplementary
Services
Covers regional parameters, such as
tones, ring patterns, and localization.
Chapter 9 Configuring the
SPA932 Attendant
Console
Describes configuring the SPA932
attendant console for use with the
SPA962 and SPA525G.
Appendix A Creating an LED Script Describes creating LED scripts.
Appendix B SPA and Wireless IP
Phone Field Reference
Describes all fields for the IP phone
with values and configuration
information.