Cisco SPA942 - Cisco - IP Phone User Manual

Customizing Cisco SPA and Wireless IP Phones
Configuring Lightweight Directory Access Protocol (LDAP)
Cisco SPA and Wireless IP Phone Administration Guide 77
4
STEP 1 Log in to the web administration interface.
STEP 2 Click Admin Login and advanced.
STEP 3 Click the Phone tab.
STEP 4 Under Web Serv, choose yes.
STEP 5 Click Submit All Changes.
Configuring Lightweight Directory Access Protocol (LDAP)
The SPA IP phones support Lightweight Directory Access Protocol v3 to enable
the retrieval of directory information. The LDAP Corporate Directory Search
feature, when configured and enabled on a SPA IP phone, allows a user to search a
specified LDAP directory for a name, phone number, or both. (LDAP is not
supported on the WIP310.)
LDAP-based directories, such as Microsoft Active Directory 2003 and OpenLDAP-
based databases, are supported.
These instructions assume you have the following equipment and services:
• A functional LDAP server such as OpenLDAP or Microsoft's Active Directory
Server 2003
• A SPA9x2 or SPA525G phone running at least 6.1.3a software on a
functional network
Users access LDAP from the Directory menu on their IP phone. There is a limit of
20 records returned from an LDAP search.
Before you use the LDAP Corporate Directory Search feature of your phone, you
need to configure some basic information.
STEP 1 Log in to the web administration interface.
STEP 2 Click Admin Login and advanced.
STEP 3 Click the System tab.

Cisco SPA942 - Cisco - IP Phone Specifications

General

Brand	Cisco
Model	SPA942 - Cisco - IP Phone
Category	IP Phone
Language	English