Cisco SPA942 - Cisco - IP Phone User Manual

SPA and Wireless IP Phone Field Reference
Info Tab
Cisco SPA and Wireless IP Phone Administration Guide 191
B
Info Tab
This section describes the fields for the following headings on the Info tab:
• Product Information, page 193
• Phone Status, page 193
System Information
NOTE: The fields on this tab are read-only
and cannot be edited.
Parameter Description
DHCP Indicates if DHCP is enabled. Displays Enabled on
SPA901, DHCP on other phones.
NOTE Not applicable to SPA525G or WIP310.
Connection Type (WIP310/
SPA525G only)
Indicates the type of internet connection for the phone:
• DHCP
• Static IP
• PPPoE (not applicable to WIP310)
Current IP Displays the current IP address assigned to the IP
phone.
Host Name Displays the current host name assigned to the
SPA9000 (defaults to SipuraSPA).
Domain Displays the network domain name of the SPA9000.
Current Netmask Displays the network mask assigned to the SPA9000.
Current Gateway Displays the default router assigned to the SPA9000.
Primary DNS Displays the primary DNS server assigned to the
SPA9000.

Cisco SPA942 - Cisco - IP Phone Specifications

General

Brand	Cisco
Model	SPA942 - Cisco - IP Phone
Category	IP Phone
Language	English