Cisco SPA942 - Cisco - IP Phone User Manual

Configuring Regional Parameters and Supplementary Services
Control Timer Values (sec)
152 Cisco SPA and Wireless IP Administration Phone Guide
8
Control Timer Values (sec)
Control Timer Value Notes
The following table describes all control timer parameters. Each value is displayed
in seconds.
Field Description
Reorder Delay Delay after far end hangs up before reorder tone is played. 0 =
plays immediately, inf = never plays. Range: 0–255 seconds.
Defaults to 5.
Call Back Expires Expiration time in seconds of a call back activation. Range: 0–
65535 seconds.
Defaults to 1800.
Call Back Retry
Intvl
Call back retry interval in seconds. Range: 0–255 seconds.
Defaults to 30.
Call Back Delay Delay after receiving the first SIP 18x response before declaring
the remote end is ringing. If a busy response is received during
this time, the Cisco IP phone still considers the call as failed and
keeps on retrying.
Defaults to 0.5.

Cisco SPA942 - Cisco - IP Phone Specifications

General

Brand	Cisco
Model	SPA942 - Cisco - IP Phone
Category	IP Phone
Language	English