Cisco SPA942 - Cisco - IP Phone

SPA and Wireless IP Phone Field Reference
Phone Tab
Cisco SPA and Wireless IP Phone Administration Guide 246
B
Ring Tone (WIP310)
Auto Input Gain (dB)
NOTE Does not apply to the WIP310.
Parameter Description
Keypad Tone Select yes to enable the keypad tone to be played
when a key on the keypad is pressed. Select no to
silence the keypad.
Keypad Tone Volume Corresponds to the volume of the keypad tone.
Default is 5.
Parameter Description
Handset Input Gain The amount of amplification to apply to the audio input
signal for the handset.
Defaults to zero.
Headset Input Gain The amount of amplification to apply to the audio input
signal for the headset.
Defaults to zero.
Speakerphone Input Gain The amount of amplification to apply to the audio input
signal for the speakerphone.
Defaults to zero.
Handset Additional Input Gain Applies additional input gain to the handset.
Headset Additional Input Gain Applies additional input gain to the headset.
Speakerphone Additional
Input Gain
Applies additional input gain to the speakerphone.