Cisco SPA942 - Cisco - IP Phone User Manual

Configuring Security, Quality, and Network Features
Setting Optional Network Parameters
Cisco SPA and Wireless IP Phone Administration Guide 129
6
STEP 5 Click Submit All Changes.
Setting Optional Network Parameters
STEP 1 Log in to the web administration interface.
STEP 2 Click Admin Login and advanced.
STEP 3 Click the System tab.
STEP 4 Configure the following fields:
PPPoE Login Password Specifies the password assigned by the ISP for
connecting on a Point-to-Point Protocol over Ethernet
(PPPoE) link.
PPPoE Service Name Specifies the service name assigned by the ISP for
connecting on a Point-to-Point Protocol over Ethernet
(PPPoE) link.
Parameter Description
Parameter Description
Host Name The host name of the phone.
Domain The network domain of the phone. However, if using
LDAP, see Configuring Lightweight Directory Access
Protocol (LDAP), page 77.
Primary DNS DNS server used by the phone in addition to DHCP
supplied DNS servers if DHCP is enabled; when DHCP
is disabled, this is the primary DNS server.
Defaults to 0.0.0.0.
However, if using LDAP, see Configuring Lightweight
Directory Access Protocol (LDAP), page 77.
Secondary DNS DNS server used by the phone in addition to DHCP
supplied DNS servers if DHCP is enabled; when DHCP
is disabled, this is the secondary DNS server.
Defaults to 0.0.0.0.

Cisco SPA942 - Cisco - IP Phone Specifications

General

Brand	Cisco
Model	SPA942 - Cisco - IP Phone
Category	IP Phone
Language	English