Cisco SPA942 - Cisco - IP Phone User Manual

Getting Started
Upgrading Firmware
24 Cisco SPA and Wireless IP Phone Administration Guide
2
STEP 3 Enter the IP address of your phone.
STEP 4 Follow the on-screen directions.
Installing the Firmware (SPA525G)
STEP 1 Log in to the web interface.
STEP 2 Choose the Firmware Upgrade tab.
STEP 3 Click Firmware Upgrade Window.
STEP 4 Browse to select the firmware file from your PC. Click Submit. The firmware is
installed and your phone reboots.
Installing the Firmware (WIP310)
STEP 1 Turn off your WIP310 and connect it to your computer by using the USB cable.
STEP 2 Double-click the executable file for the firmware upgrade (for example, double-
click wip310-5-0-11.exe).
STEP 3 Follow the on-screen instructions.
STEP 4 When the upgrade is complete, disconnect the phone from your PC and power it
on.
NOTE: Your computer must be on the same
sub-network as the phone you are upgrading.

Cisco SPA942 - Cisco - IP Phone Specifications

General

Brand	Cisco
Model	SPA942 - Cisco - IP Phone
Category	IP Phone
Language	English